Every pool owner knows that they need to add chemicals to their pool water but few really know what the chemicals actually do. In this article, we will explain what the most common pool chemicals actually do.
What Do Pool Chemicals Actually Do?
In general, pool chemicals are designed to perform one of two roles:
- Keeping the water clear and safe to use.
- “Balancing” the water.
Sanitizing Chemicals
Sanitizing chemicals (most commonly chlorine) are designed to kill bacteria; keeping the water clear and safe to use. Simply put, without sanitizing chemicals, bacteria in the pool water would quickly begin to multiply and cause issues with water clarity, algae buildup and bather safety.
There are two main ways that sanitizing chemicals are added to a pool; shock treatments and chlorine pucks.
Shock Treatments
“Shocking” is the process of burning off dead bacteria and spent sanitizers that are no longer able to do their job. Removing these particles from the water allows your sanitizers to do their jobs more efficiently. If you didn’t regularly shock your pool, these particles would build up in the water and you would need to use more and more sanitizer to keep the water clear and safe to use.
Shocking a pool is commonly done with either liquid chlorine or powdered shock (of which there are chlorine and non-chlorine based options). After the shock treatment has been added to the water, the sanitizer level will significantly increase for a short amount of time; burning off the dead bacteria and spent sanitizers in the pool water.
Chlorine Pucks
Since shock treatments only raise chlorine levels for a short time, other sanitization options are needed to maintain the sanitizer level over time. This is typically done with chlorine pucks or sticks. Rather than dissolving instantly like powdered or liquid chlorine, these are designed to dissolve slowly over the course of a few days. Given average use and normal outdoor temperatures; you typically add new pucks / sticks once per week to ensure a proper sanitizer level.
Stabilizer
Stabilizer (usually referred to as CYA in water test results) is designed to help protect your sanitizing chemicals from the UV radiation given off by the Sun. Without stabilizer your sanitizing chemicals would quickly be eaten up by UV radiation, meaning that you would need to add more of them more often in order to maintain a safe level.
Algaecides
Another chemical that is used to assist your sanitization chemicals is algaecide. Algae naturally grows a protective layer of slime to protect itself against harmful chemicals like chlorine. Algaecides are designed to break down this protective layer; making it much easier for the sanitizing chemicals to kill. While algaecides don’t kill algae on their own, they do allow you to maintain lower levels of sanitizing chemicals without fear of algae buildups.
There are two main types of algaecides used in pools. These are commonly known as quats and polyquats. Quats are typically the less concentrated than polyquats. This makes them cheaper but less efficient than polyquats. For this reason, they’re typically better for preventative maintenance. Polyquats on the other hand, are more concentrated than quats and are better for clearing up an algae bloom.
Balancing Chemicals
Water balance is the relationship between different chemical measurements in your pool water. It is based around how water reacts with other particles. Essentially, water dissolves and holds minerals until it becomes saturated and cannot hold any more. This is known as the water’s “saturation point”.
When the water balance dips below the saturation point, it becomes corrosive. Water that is corrosive will try to saturate itself by dissolving everything it comes in contact with.
When water is above the saturation point, it becomes scale forming. It can no longer hold all of the minerals that are dissolved in it. The excess minerals will then “fall out of solution”, grouping together and forming scale on any surfaces within the water.
The goal of balancing chemicals is to get your water as close to the saturation point as possible. Each one is designed to do one of 4 things:
- Increase Alkalinity.
- Increase pH.
- Decrease pH and/or Alkalinity.
- Increase Calcium Hardness.
pH Increasers
pH is the measurement of how acidic or basic the water is. Pool water with a low pH (below 7.2) is considered acidic. Over time, acidic water will break down key components of your pool equipment, especially metal components like the heater element. It will also cause the water to feel more “harsh” when you use the pool and can cause your eyes to get red and irritated.
Alkalinity Increasers
Alkalinity is essentially a “buffer” for pH. The lower the alkalinity of the water, the faster its pH levels will change. Almost everything you add to the water (including yourself) has the potential to change the pH of your pool water. Low alkalinity therefore makes it very difficult to maintain an acceptable pH level in your pool water.
pH Decreasers
Water with a pH level of 7.8 or higher is considered to be too basic. In this state, the water is beyond its saturation point and scale will begin to form on the surfaces of the pool. As with acidic water, basic water can also feel harsh to be in; causing dry skin and red, irritated eyes.
Along with reducing pH, pH decreasing chemicals can also be used to decrease alkalinity if added slowly over the course of a few days. Water with a high alkalinity will slowly increase in pH and will heavily resist efforts to lower its pH. In order to fix your pH problem, you therefore first have to lower its alkalinity.
Calcium Hardness Increasers
Water with a low calcium hardness is below its saturation point and will therefore try to saturate itself by drawing minerals out of the surfaces of your pool. This can cause things like the plumbing and pool liner to become brittle and prone to cracking and breaking.
What About Salt Pools?
Salt pools are seen by many people as an alternative to traditional chlorine pools; providing a way of using your swimming pool without the need to add many chemicals. The reality is that the salt cells used in salt water pools are simply designed to replace your chlorine pucks or sticks by generating chlorine from salt. The only difference between a salt pool and a traditional pool, therefore, is how the water is sanitized. Salt water pools still require balancing, shocking (some salt cells have a “super chlorinate” function that functions as a shock) and stabilizing in order to properly function.
Wrapping Up
Pool chemistry doesn’t have to be a mystery. Once you know what each chemical does and why it matters, managing your water becomes much easier. If you still have any questions about pool chemicals, or pool ownership in general, don’t hesitate to reach out! One of our dedicated pool experts will be able to help you with any questions that you might have.
The Spa Shoppe
(905) 666-5333
spashoppejames@gmail.com
spashoppequotes@gmail.com
1545 Dundas St E
Whitby, ON L1N 2K6
Hours
Monday – Friday: 10:00 AM – 7:00 PM
Saturday: 10:00 AM – 5:00 PM
Sunday: 11:00 AM – 4:00 PM